Filter
Top Products
Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches
infiNET™ Switches:
CLW-SW1/4RF, -SWS1/4RF,
-SLVS1RF
Introduction
Features and Functions
The CLW-SW1RF (-SW1RF) one-button switch and CLW-SW4RF (-SW4RF)
four-button switch are stand-alone wall box switches that can also act as wireless
infiNET™ devices that report to a Crestron
®
control processor via a Crestron
infiNET wireless gateway.
infiNET Switches Functional Summary
• Two-way infiNET switches
⇒
⇒
⇒
⇒
2.4 GHz infiNET mesh network technology
Range up to 150 feet indoors, or 250 ft outdoors (subject to site-
specific conditions)
Range may be increased with the use of additional infiNET devices
or C2N-MNETRPT repeaters
“Wi-Fi” friendly operating frequency to avoid interference
• One-button and four-button configurations available in white, black,
and almond
• Can be ordered with custom-engraved buttons
• Can operate as a local load control or infiNET keypad.
These switches can be operated with a user-adjustable delay up to 10 minutes and 55
seconds. For more information, refer to “Operation” on page 9 for more information.
These infiNET switches are a part of Crestron’s line of lighting products using
infiNET mesh network technology. infiNET technology is “Wi-Fi” friendly and
provides fault tolerance and increased effective signal strength as network devices
are added.
As an infiNET device, these switches communicate with a Crestron control system
via a C2N-MNETGW infiNET Gateway. Up to 30 infiNET devices (including
C2N-MNETRPT infiNET Repeaters) can communicate with one C2N-MNETGW
Operations Guide - DOC. 6397 infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF • 1