Datalogic Scanning I GD4100 Barcode Reader User Manual


 
Interleaved 2 of 5 (I 2 of 5)
Product Reference Guide 209
Interleaved 2 of 5 (I 2 of 5) — cont.
2 of 5 Decoding Level
NOTE
Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to
very conservativ
e depending on a particular customer’s needs.
Choosing Level 1 results in a very conservative decoder at the expe
nse of not being
able to
read poorly printed or damaged labels.
Choosing Level 5 results in a very aggressive decoder.
This aggressive behavior allows
decoding of poorly printed and damaged labels at the expense of increasing the likelihood
of decoding errors.
Choosing Level 3, which is the default setting, allows t
he majority of product labels to be
decoded.
There are many factors that determine when to change the decoding level for a particular
symbology. These factors include spots, voids, non-uniform bar/space widths, damaged labels,
etc. that may be experienced in some barcode labels. If there are many hard to read or damaged
labels that cannot be decoded using a conservative setting, increase the decoding level to be
more aggressive. If the majority of labels are very good quality labels, or there is a need to
decrease the possibility of a decoder error, lower the decoding level to a more conservative level.
This configuration item applies to Interleaved 2 of 5, Datalogic 2 of
5 and Standard 2 of 5.