Filter
Top Products
Product Reference Guide 289
Appendix C
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for feature
descriptions and programming barcodes for each
parameter. A column has also been provided for recording of
your preferred default settings for
these same configurable features.
Table 37. Standard Defaults
Parameter Default Your Setting Page Number
General Features
Double Read Timeout
0.4 Second 23
Label Gone Timeout
160 ms 25
Sleep Mode Timeout
Disable 27
Power On Alert
4 Beeps 29
Good Read: When to Indicate
After Decode 30
Good Read Beep Type
Mono 31
Good Read Beep Frequency
Medium 32
Good Read Beep Length
80 ms 32
Good Read Beep Volume
High 34
Good Read LED Duration
LED on until
next trigger pull
35
Scan Mode
Trigger Single 37
Scanning Active Time
5 Seconds 42
Flash On Time
1 Second 44
Flash Off Time
600 ms 46
Green Spot Duration
300 ms 49
RS-232
Baud Rate
9600 52