Filter
Top Products
Understanding the Tool Box Menus 353
Line Monitor Off Turns off the volume of the line monitor.
Low Specifies the volume of the line monitor, which
audibly monitors a transmission through the internal
speaker until a connection is made.
Medium*
High
Ring Tone
Volume
Off Turns off the volume of the ring tone.
Low Specifies the volume of the ring tone, which indicates
that an incoming call is a telephone call through the
internal speaker when Receive Mode is set to
Telephone/Fax.
Medium
High*
Line Type PSTN* Sets the line type to PSTN.
PBX Sets the line type to PBX.
Tone/Pulse Tone* Sets the dialing type to Tone.
Pulse(10PPS
)
Sets the dialing type to Pulse (10 pulse per second).
Pulse(20PPS
)
Sets the dialing type to Pulse (20 pulse per second).
Resend Delay 8* Specifies the interval between transmission attempts.
3–255
Redial
Attempts
3* Specifies the number of redial attempts to make when
the destination fax number is busy. If you enter 0, the
printer will not redial.
0–9
Redial Delay 1* Specifies the interval between redial attempts.
1–15
Junk Fax
Setup
Off* Does not reject faxes sent from unwanted numbers.
On Rejects faxes sent from unwanted numbers by
accepting faxes only from the fax numbers registered
in the Phone Book.
Remote
Receive
Off* Disables the remote receive feature.
On Receives a fax by pressing a remote receive code on the
external telephone after picking up the handset of the
telephone.
Remote Rcv
Tone
00* Specifies the remote receive code in two digits to start
Remote Receive.
00–99