Filter
Top Products
Precautions
Service Manual
5-11
1. Before you remove the Scanner Ass'y, you should
remove:
- Rear Cover (Refer to 5.4)
- Side Cover (Left, Right) (Refer to 5.6)
2. Remove the two screws securing the Scanner Ass'y,
as shown below.
3. Remove the one screw securing the Ground Cable
and unplug the four connectors and CCD Cable.
4. Pull up the Scanner Ass'y, as shown below.
5. Release the ADF Harness from the underneath the
Scanner Ass'y.
5.7 Scanner Ass'y
Scanner Ass'y
ADF Harness
ADF Ground Cable