Filter
Top Products
Service Manual
Alignment & Adjustments
6-8
5. Release the blue strap, the rear cover stopper, and
fully open the rear cover, as shown.
6. Unfold the duplex guide fully.
7. While pushing the fuser lever to the right, open the
fuser door.
NOTE: Make sure to unfold the fuser guide before
opening the fuser door or you may damage the
fuser door.
8. Pull the jammed paper out.
If the jammed paper does not move when you pull,
push the two blue pressure levers up to loosen the
paper, and then remove it.
9. Return the levers, fuser door, rear cover stopper, and
duplex guide to their original position.
10. Close the rear cover.
Printing automatically resumes.