Filter
Top Products
Service Manual
Precautions
5-22
5.13 Shield SMPS Ass'y
1. Before you remove the Shield SMPS Ass'y, you
should remove:
- Rear Cover (Refer to 5.4)
- Side Cover Right (Refer to 5.6.3)
- Duplex Drive Ass'y (Refer to 5.12)
2. Unplug the two connectors (HVPS, Fuser).
3. Remove the three screws securing the Shield SMPS
Ass'y and remove it.
4. Unplug the connector (AC Inlet) and remove the four
screws securing SMPS and remove it.
HVPS Connector
Fuser Connector
Shield SMPS Ass'y
SMPS
Insulator Sheet
Shield SMPS
(With AC Inlet)
AC Inlet
Connector