Filter
Top Products
Understanding the Printer Menus 293
Network
Use the Network menu to change the printer settings affecting jobs sent to the
printer through the wired or wireless network.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The
change becomes effective after the printer is turned off and then on again.
Values:
Wireless Status
NOTE: Wireless Status feature is available only when the printer is connected
using the wireless network.
Purpose:
To confirm the wireless communication status.
Values:
Color Prints in the color mode.
Auto
*
Detects the Ethernet settings automatically.
10BASE-T Half Uses 10BASE-T Half-duplex.
10BASE-T Full Uses 10BASE-T Full-duplex.
100BASE-TX Half Uses 100BASE-TX Half-duplex.
100BASE-TX Full Uses 100BASE-TX Full-duplex.
1000BASE-T Full Uses 1000BASE-T Full-duplex.
Connection Good
Acceptable
Low
No Reception