Dell 2150cn/2150cdn Printer User Manual


 
302 Understanding the Printer Menus
Select a high value if your printer is in constant use. In most circumstances, this
keeps the printer ready to operate with minimum warm-up time. Select a value
between 1 and 30 minutes for power save mode if you want a balance between
energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver
mode when it receives data from the computer. You can also change the status of
the printer to the standby mode by pressing any button on the operator panel.
Auto Reset
Purpose:
To automatically reset the settings to the default settings and return to the
standby mode after you do not specify any settings for the specified time.
Values:
Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops
abnormally. The print job is cancelled if the time-out time is exceeded.
Values:
Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The
print job is cancelled if the time-out time is exceeded.
45sec
*
1min
2min
3min
4min
Off Disables the fault time-out.
On
*
60sec
*
Sets the amount of time the printer waits before canceling a job
that stops abnormally.
3-300 sec.