Filter
Top Products
34 Power-Button Board
Replacing the Power-Button Board
Procedure
1
Connect the power-button board cable to the connector on the
power-button board.
2
Slide the power-button board into slot on the middle frame.
Postrequisites
1
Replace the back cover. See "Replacing the Back Cover" on page 24.
2
Replace the stand. See "Replacing the Stand" on page 21.
3
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 34 Friday, March 30, 2012 1:21 PM