Filter
Top Products
Processor Heat-Sink Fan 71
Replacing the Processor Heat-Sink Fan
Procedure
1
Align the screw holes on the processor heat-sink fan with the screw holes
on the chassis.
2
Replace the screws that secure the processor heat-sink fan to the chassis.
3
Connect the processor heat-sink fan cable to the system-board connector.
4
Adhere the aluminum foil on the processor heat-sink fan over the
processor heat-sink.
Postrequisites
1
Replace the system-board shield.
See "Replacing the System-Board Shield" on page 51.
2
Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 44.
3
Replace the back cover. See "Replacing the Back Cover" on page 24.
4
Replace the stand. See "Replacing the Stand" on page 21.
5
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 71 Friday, March 30, 2012 1:21 PM