Filter
Top Products
I/O Board Shield 85
I/O Board Shield
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the I/O Board Shield
Prerequisites
1
Remove the stand. See "Removing the Stand" on page 19.
2
Remove the back cover. See "Removing the Back Cover" on page 23.
3
Remove the VESA-mount bracket.
See "Removing the VESA-Mount Bracket" on page 43.
4
Remove the system-board shield.
See "Removing the System-Board Shield" on page 49.
5
Remove the power-supply fan bracket.
See "Removing the Power-Supply Fan Bracket" on page 77.
6
Remove the B-CAS card. See "Removing the B-CAS Card" on page 25.
7
Remove the I/O cover. See "Removing the I/O Cover" on page 81.
OM_Book.book Page 85 Friday, March 30, 2012 1:21 PM