Filter
Top Products
90 Power-Supply Unit
Procedure
1
Disconnect the main power cable and processor power cable from the
connectors on the system board.
2
Remove the main power cable and processor power cable from the
routing guides on the chassis.
3
Remove the power-supply port cable from the routing guides
on the chassis.
4
Remove the screws that secure the power-supply unit to the chassis.
5
Lift the power-supply unit off the chassis.
1 screws (4) 2 power-port cable
3 power-supply unit 4 main power cable
5 processor power cable
2
5
3
4
1
OM_Book.book Page 90 Friday, March 30, 2012 1:21 PM