Filter
Top Products
56 TV Tuner Card
Replacing the TV Tuner Card
Procedure
1
Align the notch on the TV tuner card with the tab on the
system-board connector.
2
Insert the TV tuner card connector at a 45-degree angle into the
system-board connector.
3
Press the other end of the TV tuner card down into the slot on the
system board and replace the screws that secure the TV tuner card to
the system-board connector.
4
Connect the antenna cable to the connector on the TV tuner card.
5
For Japan only: connect the B-CAS card cable to the connector on
the TV tuner card.
Postrequisites
1
Replace the system-board shield.
See "Replacing the System-Board Shield" on page 51.
2
Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 44.
3
Replace the back cover. See "Replacing the Back Cover" on page 24.
4
Replace the stand. See "Replacing the Stand" on page 21.
5
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 56 Friday, March 30, 2012 1:21 PM