Filter
Top Products
Removing the Memory Modules
1. Remove the memory module cover.
2. Use your fingertips to carefully spread apart the inner tabs on each end of the memory module socket.
The module should pop up.
3. Lift the memory module out of its socket.
Replacing the Memory Modules
1
M2.5 x 12-mm screw (1)
2
captive screws (2)
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
1
JDIM 1
2
JDIM 2
3
memory module sockets (2)
4
inner tabs (2 per socket)