Filter
Top Products
Appendix A. SetIP Address Utility 22
Appendix A. SetIP Address Utility
This program is for the network IP setting using the MAC address which is the
hardware serial number of the network printer card or interface. Especially, it is
for the network administrator to set several network IPs at the same time.
NOTE: You can only use Set IP Address Utility when your printer is connected to a
network.
1
Connect the straight network cable to your printer/MFP.
2
Print the Network Configuration page of the printer/MFP to see the
current network configuration and MAC address. Refer to a user’s guide of
your printer/MFP to print the network configuration page.
3
From the
Start
menu, select
Programs Dell Dell Printers
your
printer driver name Set IP Address Utility
.
Or
From the
Start
menu, select
Programs Dell Printers
your printer
driver name Set IP Address Utility
.
4
Click in the SetIP window to open the TCP/IP configuration window.
5
Enter the network card's MAC address, IP address, subnet mask, default
gateway, and then click
Apply
.
NOTE: when you enter the MAC address, enter it without colon(:).
6
Click
OK
.
7
Click
Exit
to close the SetIP program.