Filter
Top Products
Under the Properties tab, you can view the details of system’s performance degradation.
The following table lists the possible values for status and cause of a probe:
Table 9. Possible Values For Status And Cause Of A Probe
Status Values Cause Values
Degraded User Configuration
Insufficient Power Capacity
Unknown Reason
Normal [N/A]
Intrusion
Click the Intrusion object to manage your system's chassis intrusion status. Server Administrator monitors
chassis intrusion status as a security measure to prevent unauthorized access to your system's critical
components. Chassis intrusion indicates that someone is opening or has opened the cover of the
system's chassis. The Intrusion object action window can have the following tabs, depending on the
user's group privileges: Properties and Alert Management
Properties
Subtab: Intrusion
Under the Properties tab, you can view the chassis intrusion status.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View the current alert actions settings and set the alert actions that you want to be performed in the
event that the intrusion sensor returns a warning or failure value.
• View the current SNMP trap alert thresholds and set the alert threshold levels for the intrusion sensor.
The selected traps are triggered if the system generates a corresponding event at the selected severity
level.
Memory
Click the Memory object to manage your system's memory devices. Server Administrator monitors the
memory device status for each memory module present in the monitored system. Memory device
prefailure sensors monitor memory modules by counting the number of ECC memory corrections.
Server Administrator also monitors memory redundancy information if your system supports this feature.
The Memory object action window can have the following tabs, depending on the user's group
privileges: Properties and Alert Management.
Properties
Subtab: Memory
47