Filter
Top Products
• View current SNMP trap alert thresholds and set the alert threshold levels for system power watts. The
selected traps are triggered if the system generates a corresponding event at the selected severity
level.
NOTE: The System Peak Power trap generates events only for informational severity.
Processors
Click the Processors object to manage your system's microprocessor(s). A processor is the primary
computational chip inside a system that controls the interpretation and execution of arithmetic and logic
functions. The Processors object action window can have the following tabs, depending on the user's
group privileges: Properties and Alert Management.
Subtab: Information
Properties
Under the Properties tab, you can view information about your system's microprocessor(s) and access
detailed capabilities and cache information.
Alert Management
Subtabs: Alert Actions
Under the Alert Management tab, you can view current alert actions settings and set the alert actions that
you want to be performed in the event that a processor returns a warning or failure value.
Remote Access
Click the Remote Access object to manage the Baseboard Management Controller (BMC) or Integrated
Dell Remote Access Controller (iDRAC) features and Remote Access Controller features.
Selecting Remote Access tab allows you to manage the BMC/iDRAC features such as, general
information on the BMC/iDRAC. You can also manage the configuration of the BMC/iDRAC on a local
area network (LAN), serial port for the BMC/iDRAC, terminal mode settings for the serial port, BMC/iDRAC
on a serial over LAN connection, and BMC/iDRAC users.
NOTE: If an application other than Server Administrator is used to configure the BMC/iDRAC while
Server Administrator is running, the BMC/iDRAC configuration data displayed by Server
Administrator may become asynchronous with the BMC/iDRAC. It is recommended that Server
Administrator be used to configure the BMC/iDRAC while Server Administrator is running.
DRAC allows you to access your system's remote system management capabilities. The Server
Administrator DRAC provides remote access to inoperable systems, alert notification when a system is
down, and the ability to restart a system.
The Remote Access object action window can have the following tabs, depending on the user's group
privileges:Properties, Configuration, and Users.
Subtab: Information
Properties
51