Filter
Top Products
5
Working With Remote Access Controller
The Dell systems baseboard management controller (BMC)/Integrated Dell Remote Access Controller
(iDRAC) monitors the system for critical events by communicating with various sensors on the system
board and sends alerts and log events when certain parameters exceed their preset thresholds. The BMC/
iDRAC supports the industry-standard Intelligent Platform Management Interface (IPMI) specification,
enabling you to configure, monitor, and recover systems remotely.
The DRAC is a systems management hardware and software solution designed to provide remote
management capabilities, crashed system recovery, and power control functions for Dell systems.
By communicating with the system’s baseboard management controller (BMC)/Integrated Dell Remote
Access Controller (iDRAC), the DRAC can be configured to send you e-mail alerts for warnings or errors
related to voltages, temperatures, and fan speeds. The DRAC also logs event data and the most recent
crash screen (available only on systems running Microsoft Windows operating system) to help you
diagnose the probable cause of a system crash.
The Remote Access Controller provides remote access to an inoperable system, allowing you to get the
system up and running as quickly as possible. The Remote Access Controller also provides alert
notification when a system is down and allows you to remotely restart a system. Additionally, the Remote
Access Controller logs the probable cause of system crashes and saves the most recent crash screen.
You can log in to the Remote Access Controller through the Server Administrator home page or by
directly accessing the controller's IP address using a supported browser.
When using the Remote Access Controller, you can click Help for more detailed information about the
specific window you are viewing. Remote Access Controller help is available for all windows accessible to
the user based on the user privilege level and the specific hardware and software groups that Server
Administrator discovers on the managed system.
NOTE: For more information about the BMC, see the Dell OpenManage Baseboard Management
Controller User's Guide at dell.com/systemsecuritymanuals.
NOTE: For more information on using DRAC 5, see the Dell Remote Access Controller 5 User’s
Guide at dell.com/systemsecuritymanuals.
NOTE: For detailed information on configuring and using the iDRAC, see the Integrated Dell Remote
Access Controller User’s Guide
at dell.com/systemsecuritymanuals.
The following table lists the graphical user interface (GUI) field names and the applicable system, when
Server Administrator is installed on the system.
Table 10. GUI Field Names And The Applicable System
GUI Field Name Applicable System
Modular Enclosure Modular system
Server Modules Modular system
57