Filter
Top Products
Removing and Installing Parts 175
5
Ensure that the cover is seated correctly.
6
Replace and tighten the two screws that secure the computer cover, using a
screwdriver.
7
Move the computer to the upright position.
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
NOTICE: Ensure that none of the system air-vents are blocked.
1 computer cover tab 2 slot 3 computer cover
1
2
3
book.book Page 175 Monday, October 6, 2008 11:38 AM