Filter
Top Products
Figure 47. Installing the system battery
1. system battery 2. positive side of the battery connector
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in After working inside your system.
3. While booting, press <F2> to enter the System Setup and ensure the battery is operating properly.
4. Enter the correct time and date in the System Setup Time and Date fields.
5. Exit the System Setup.
Hard-drive backplane
Depending on your configuration,
8–Hard-drive
system
supports
2.5 inch (x4) SAS/SATA backplane
10–Hard-drive
system
supports
2.5 inch (x10) SAS/SATA backplane that supports X10 and 4 (PCIe SSDs) + 6
24–Hard-drive
system
supports
1.8 inch (x24) SAS/SATA backplane
111