Filter
Top Products
Power indicator pattern Condition
NOTE: For security purposes, Quick Sync turns
off after thirty seconds of in-activity after the
activation button is pressed. Once timed-out,
the user is expected to press the activation
button again to activate Quick Sync.
Back-panel features and indicators
Figure 8. Back-panel features and indicators—8 hard-drive system (2 PCIe expansion cards)
Item Indicator, Button, or
Connector
Icon Description
1 System identification
button
The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the LCD panel on the front and the
system status indicator on the back blink until one
of the buttons is pressed again.
Press to toggle the system ID on and off. If the
system stops responding during POST, press and
hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup)
press and hold for more than 15 seconds.
2 System identification
connector
Allows you to connect the optional system status
indicator assembly through the optional cable
management arm.
3 iDRAC8 Enterprise port Dedicated management port.
NOTE: The port is available for use only if the
iDRAC87 Enterprise license is installed on your
system.
20