Filter
Top Products
Figure 15. Removing and installing the system
1. latch release lock 2. system cover
3. latch
Installing the system cover
Prerequisites
Ensure that you read the Safety instructions.
Steps
1. Align the slots on the system cover with the tabs on the chassis.
2. Press the cover release latch, and push the cover toward the front of the chassis until the latch locks
into place.
3. Turn the latch release lock clockwise to the locked position.
4. Install the optional bezel.
5. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
54