Filter
Top Products
Management Applications for PERC Cards 89
NOTE: The help information for all of the options within the UEFI RAID
Configuration Utility can be viewed by clicking on Help at the top right-hand corner
of the browser screen. Help information for individual option menus can also be
viewed by simply scrolling down on each option.
NOTE: Some of the options within the UEFI RAID Configuration Utility are not
present if the controller does not support the corresponding feature. Options may
also be grayed out if the feature is supported in existing configuration.
NOTE: Background operations are blocked on the PERC H310 controller in the UEFI
RAID Configuration Utility and no operation progress updates are to be seen.
Exiting the UEFI RAID Configuration Utility
To exit the UEFI RAID Configuration Utility, press <Esc> or click on Back
at any browser screen, until you return to the Device Settings menu.
Configuration Options
There are four main configuration option menus available in the UEFI RAID
Configuration Utility. These menus are outlined below.
•
Controller Management
—Performs controller properties, foreign
configurations, and battery, and other high-level controller functions.
•
Virtual Disk Management
—Creates or deletes virtual disks, manage
virtual disk properties, and performs operations such as background
initialization, consistency check, locate and reconfiguration
•
Physical Disk Management
—Displays physical disk properties and
performs operations such as assign or unassign hot spares, locate, force
online/offline and rebuild after a physical disk failure
•
Enclosure Management
—Displays attached enclosures, enclosure
firmware revision and physical disks attached to the enclosures