Filter
Top Products
www.dell.com | support.dell.com
102 Getting Connected
Configure wireless networking for your device in one of the following scenarios:
• Network Card is set up
• Wireless Network is broadcasting SSID
• Wireless Network is not broadcasting SSID
If the Network Card is Set Up
Normally the internal wireless card is already set up. There are times when
you must choose the network card. On the Axim X50/X50v configurations
that have built-in wireless, the network card is associated with the enabled
wireless. If wireless is not enabled or you are using a socket card for wireless
connection, then choose the network card:
1
Ta p
Start
→
Settings
→
Connections.
2
Ta p
Network Cards.
3
Choose either
Internet
or
Work
from the menu.
4
Choose the network card to connect to the network. For the Axim
X50/X50v with built-in wireless, choose
Dell Axim X50/X50v WLAN
Wireless Adapter.
5
Choose whether the network card assigns an IP address or receives an
IP address automatically.
6
Enter the Server IP addresses if required and tap
OK.
If the Wireless Network is Broadcasting SSID
1
Press the wireless button to enable wireless capability. The green LED
in the right top corner of the device indicates that the wireless is functional.
2
Ta p
Start
→
Settings
→
Connections.
3
To add, edit, or delete a profile, select the corresponding action tap
Network Cards.
4
In the
Configure Wireless Networks
window, select one of the available
network names and tap
OK.