Filter
Top Products
Replacing the AC-Adapter Connector
1. Follow the instructions in Before You Begin.
2. Align the screw hole on the AC-adapter connector with the screw hole on the top cover.
3. Replace the screw that secures the AC-adapter connector to the top cover.
4. Route the AC-adapter connector cable through the routing guides.
5. Connect the AC-adapter connector cable to the system-board connector.
6. Follow the instructions from step 8 to step 11 in Replacing the Top Cover.
7. Replace the display assembly (see Replacing the Display Assembly).
8. Replace the keyboard (see Replacing the Keyboard).
9. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).
10. Replace the memory module(s) (see Replacing the Memory Module(s)).
11. Replace the module cover (see Replacing the Module Cover).
12. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.