Filter
Top Products
2. Clean the thermal grease from the bottom of the heat sink and reapply it.
3. Align the seven captive screws on the heat sink with the screw holes on the system board and tighten the screws in sequential order (indicated on the
heat sink).
4. Follow the instructions from step 8 to step 11 in Replacing the Top Cover.
5. Replace the display assembly (see Replacing the Display Assembly).
6. Replace the keyboard (see Replacing the Keyboard).
7. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).
8. Replace the memory module(s) (see Replacing the Memory Module(s)).
9. Replace the module cover (see Replacing the Module Cover).
10. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.