Dell L502X Laptop User Manual


  Open as PDF
of 55
 
Back to Contents Page
System Board
Dell™XPS™L502XServiceManual
Removing the System Board
Replacing the System Board
Entering the Service Tag in the BIOS
Removing the System Board
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the module cover (see Removing the Module Cover).
4. Remove the memory module(s) (see Removing the Memory Module(s)).
5. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).
6. Remove the keyboard (see Removing the Keyboard).
7. Remove the display assembly (see Removing the Display Assembly).
8. Follow the instructions from step 9 to step 14 in Removing the Top Cover.
9. Disconnect the USB board cable and speaker cable from the connectors on the system board.
10. Turn the top cover over.
11. Remove the heat sink (see Removing the Heat Sink).
12. Remove the processor module (see Removing the Processor Module).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
CAUTION: Handle components and cards by their edges, and avoid touching pins and contacts.
1
USB board cable connector
2
speaker cable connector
 previous next