Dell L502X Laptop User Manual


  Open as PDF
of 55
 
Back to Contents Page
Speakers
Dell™XPS™L502XServiceManual
Removing the Speakers
Replacing the Speakers
Removing the Speakers
1. Follow the instructions in Before You Begin.
2. Remove the system board (see Removing the System Board).
3. Make note of the speakers cable routing and remove the cable from the routing guides.
4. Remove the four screws (two on each speaker) that secure the speakers to the top cover.
5. Lift the speakers along with its cable off the top cover.
Replacing the Speakers
1. Follow the instructions in Before You Begin.
2. Route the speakers cable through the routing guides.
3. Align the screw holes on the speakers with the screw holes on the top cover.
4. Replace the four screws (two on each speaker) that secure the speakers to the top cover.
5. Replace the system board (see Replacing the System Board).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
speaker cable routing
2
speakers (2)
3
screws (4)
 previous next