Filter
Top Products
Back to Contents Page
Fan
Dell™XPS™L502XServiceManual
Removing the Fan
Replacing the Fan
Removing the Fan
1. Follow the instructions in Before You Begin.
2. Press and eject any installed cards from the Media Card Reader.
3. Remove the battery (see Removing the Battery).
4. Remove the module cover (see Removing the Module Cover).
5. Remove the memory module(s) (see Removing the Memory Module(s)).
6. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).
7. Remove the keyboard (see Removing the Keyboard).
8. Remove the display assembly (see Removing the Display Assembly).
9. Follow the instructions from step 9 to step 14 in Removing the Top Cover.
10. Remove the two screws that secure the fan to the base cover.
11. Lift the fan off the base cover.
Replacing the Fan
1. Follow the instructions in Before You Begin.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
screws (2)
2
fan