Dell L502X Laptop User Manual


  Open as PDF
of 55
 
Back to Contents Page
Palm-Rest Assembly
Dell™XPS™L502XServiceManual
Removing the Palm-Rest Assembly
Replacing the Palm-Rest Assembly
Removing the Palm-Rest Assembly
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the screw that secures the palm-rest assembly to the base cover.
4. Release and push the palm-rest assembly tabs off the base cover.
5. Turn the computer over and open the display as far as possible.
6. Using a plastic scribe, gently ease the palm-rest assembly from the top cover.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
palm-rest assembly tabs (2)
2
screw
3
base cover
 previous next