Filter
Top Products
7. Turn the keyboard over and place it over the top cover as shown in the following illustration.
8. Lift the connector latch and disconnect the keyboard cable from the system-board connector.
9. Lift the keyboard off the top cover.
Replacing the Keyboard
1. Follow the instructions in Before You Begin.
2. Slide the keyboard cable into the system-board connector and press down on the connector latch to secure the cable.
3. Slide the keyboard backlight cable into the system-board connector and press down on the connector latch to secure the cable.
4. Slide the tabs on the keyboard into the slots on the top cover and lower the keyboard into place.
5. Gently press the top of the keyboard to secure it to the tabs on the top cover.
6. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).
7. Replace the battery (see Replacing the Battery).
Back to Contents Page
1
top cover
2
keyboard
3
keyboard cable connector
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.