Filter
Top Products
Back to Contents Page
TV Tuner Connector
Dell™XPS™L502XServiceManual
Removing the TV Tuner Connector
Replacing the TV Tuner Connector
Removing the TV Tuner Connector
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the module cover (see Removing the Module Cover).
4. Remove the memory module(s) (see Removing the Memory Module(s)).
5. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).
6. Remove the keyboard (see Removing the Keyboard).
7. Remove the display assembly (see Removing the Display Assembly).
8. Follow the instructions from step 9 to step 14 in Removing the Top Cover.
9. Remove the AC adapter connector (see Removing the AC-Adapter Connector).
10. Make note of the TV tuner connector cable routing and remove the cable from the routing guides.
11. Remove the two screws that secure the TV tuner connector to the top cover.
12. Lift the TV tuner connector off the top cover.
Replacing the TV Tuner Connector
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
screws (2)
2
TV tuner connector cable