Filter
Top Products
Error Code Message Information
3. If the issue persists, see Getting Help.
VLT0209
Message The memory module <
number
> <
name
> voltage is greater than the upper critical
threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see Getting Help.
VLT0210
Message The memory module <
number
> <
name
> voltage is outside of range.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see Getting Help.
VLT0212
Message The disk drive bay <
name
> voltage is less than the lower warning threshold.
LCD Message The disk drive bay <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see Getting Help.
VLT0213
Message The disk drive bay <
name
> voltage is less than the lower critical threshold.
LCD Message The disk drive bay <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
125