Filter
Top Products
Error Code Message Information
HWC5032
Message A fabric mismatch detected on IO module <
number
>.
Details The fabric type for IOM's on the same chassis fabric must match.
Action Check chassis fabric type in CMC GUI and compare to the type of both IOM's.
HWC5034
Message A link tuning failure detected on IO module <
number
>.
Details Link tuning table not supported for this IO modular.
Action Update the CMC firmware. If the issue persists, see Getting Help.
HWC5036
Message A failure is detected on IO module <
number
>.
Details The IOM module performance may be impacted.
Action If the issue persists, see Getting Help.
HWC6000
Message The <
name
> controller is offline.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting Help.
HWC6002
Message The <
name
> controller is stuck in boot mode.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting Help.
HWC6003
Message The <
name
> controller is booting.
HWC6004
Message Cannot communicate with <
name
> controller.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting Help.
HWC7002
Message Server <
number
> health changed to a warning state from a normal state.
Details Server <
number
> health changed to a warning state from a normal state.
Action Review System Log or front panel for additional information.
HWC7004
Message Server <
number
> health changed to a critical state from either a normal or warning state.
Details Server <
number
> health changed to a warning state from a normal state.
Action Review System Log or front panel for additional information.
HWC7006
Message Server <
number
> health changed to a nonrecoverable state from a less severe state.
Details Server <
number
> health changed to a warning state from a normal state.
91