Filter
Top Products
Configuration: Disk Groups and Virtual Disks 113
To create a security key:
1
In the AMW toolbar, select
Storage Array
Physical Disk Security
Create Security Key
.
The
Create Security Key
window is displayed.
2
In
Security key identifier
, enter a string that becomes part of the secure
key identifier.
You can enter up to 189 alphanumeric characters without spaces,
punctuation, or symbols. Additional characters is generated automatically
and is appended to the end of the string that you enter. The generated
characters help to ensure that the secure key identifier is unique.
3
Edit the default path by adding a file name to the end of the path or Click
Browse,
navigate to the required folder and enter the name of the file.
4
In
Pass phrase
,
enter a string for the pass phrase.
The pass phrase must:
• be between eight and 32–characters long.
• contain at least one uppercase letter.
• contain at least one lowercase letter.
• contain at least one number.
• contain at least one non-alphanumeric character, for example, < > @ +.
The pass phrase that you enter is masked.
NOTE: Create Key is active only if the pass phrase meets the above
mentioned criterion.
5
In
Confirm pass phrase
, re-enter the exact string that you entered in
Pass phrase
.
Make a record of the pass phrase that you entered and the security key
identifier that is associated with the pass phrase. You need this
information for later secure operations.
6
Click
Create Key
.
7
Make a record of the security key identifier and the file name from the
Create Security Key Complete
dialog, and click
OK
.
book.book Page 113 Wednesday, June 8, 2011 5:01 PM