Filter
Top Products
Management: Installing Array Components 233
3
Connect all the cables to the RAID controller module. If SFP transceivers
and fiber optic cables were present, reinstall them in the correct ports.
4
If applicable, update the firmware for the RAID controller module. For
information about the latest firmware, see the Dell Support website at
support.dell.com
.
Opening the RAID Controller Module
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Read and follow the safety instructions that came with the product.
1
Turn off the array and host server.
2
Disconnect all the power cables connected to the array.
3
Remove the RAID controller module. See "Removing a RAID Controller
Module Blank" on page 229.
4
Remove the screws from the sides of the RAID controller module. See
Figure 15-9.
5
While pressing the indent, slide the cover in the direction of the arrow and
lift it away from the RAID controller module. See Figure 15-9.
book.book Page 233 Wednesday, June 8, 2011 5:01 PM