Filter
Top Products
192 Configuration: Premium Feature— Remote Replication
Viewing the Properties Pane
The Properties pane is a view-only display of the physical and logical
characteristics of a single virtual disk in a replicated pair, or a single
replication repository virtual disk.
To view the Properties pane:
1
In the
AMW
, select the Logical tab.
2
Select either the primary or secondary virtual disk of the replicated pair.
The Properties pane shows properties for the selected virtual disk. Under
Replication properties, the Replication status displays the synchronization
status of the replicated pair. When the primary and secondary virtual disks are
synchronizing, the Replication status shows a synchronizing icon see "Virtual
Disk Status Icons" on page 194).
Viewing Logical Elements of the Secondary Virtual Disk
To view the logical elements of the secondary virtual disk of a remote
replication:
1
In the AMW of the local storage array, select the
Logical
tab.
2
Right-click the secondary virtual disk of the remote replication.
3
Select
View Associated Logical Elements
.
The View Associated Logical Elements pop-up is displayed, revealing these
logical elements:
• Primary and secondary virtual disks and their locations
• Replication repository virtual disks and their locations
book.book Page 192 Wednesday, June 8, 2011 5:01 PM