Filter
Top Products
198 Configuration: Premium Feature— Remote Replication
• Changing the segment size of a virtual disk
• Defragmenting a disk group
• Adding free capacity to a disk group
• Changing the RAID level of a disk group
To change the synchronization priority and method for an existing remote
replication:
1
In the
AMW
of the storage array containing the primary virtual disk of the
replicated pair, right-click the
Logical
tab.
2
Select
Change
Synchronization
Settings.
The
Change Synchronization Settings
dialog is displayed.
3
In the Replicated pairs table, select the primary virtual disk and the remote
virtual disk you want to change. To select all virtual disks, click
Select All
.
4
On the
Select Synchronization Priority
slide bar, select the
synchronization priority for the replicated pair.
5
Select either
Manual
or
Automatic
resynchronization.
•
Automatic
—Resynchronization starts immediately after
communication is restored between unsynchronized replicated
virtual disks.
•
Manual
—The replicated pair must be manually resynchronized each
time communication is restored between unsynchronized replicated
virtual disks.
6
Click
OK
.
The
Change Synchronization Settings confirmation
message is displayed.
7
In the
Change Synchronization Settings confirmation
message, click
Yes
.
The Change Synchronization Priority - Progress bar displays the progress of
the resynchronization.
8
Click
OK
.
book.book Page 198 Wednesday, June 8, 2011 5:01 PM