Filter
Top Products
104 Adding and Replacing Parts
www.dell.com | support.dell.com
Replacing the Palm Rests
1 Save and close any open files, exit any open programs, and shut down
the computer (see page 42).
2 If the computer is connected (docked) to a docking device, undock it.
3 Keep the display open, and tilt the computer back so that you can
access the bottom of the computer.
4 Slide and hold the latch release on the left side, and remove any device
installed in the module bay.
5 Slide and hold the latch release on the right side, and remove any
battery installed in the battery bay.
6 Locate the indentation under each palm rest, place your thumbs on
the indentation, and push to release the palm rests.
7 Remove the palm rests.
8 To replace the palm rests, insert the tabs on the edge of the palm rest
into the slots and then press down until you feel a click.
Repeat the process for each side.
b
o
tt
om o
f
compu
t
er
1H018bk3.book Page 104 Monday, October 14, 2002 2:26 PM