Filter
Top Products
94 Installing System Components
6
Install the expansion cards and connect any cables. See "Installing an Expansion Card" on page 70.
7
Connect the cables that you removed in "Removing the System Board" on page 91. See Figure 6-2.
8
Reinstall the card and front fans. See "Replacing the Card and Front Fans" on page 83.
9 Rotate the hard-drive carrier back into the system. See
"Rotating the Hard-Drive Carrier Into the
System" on page 46
.
10
Close the system. See "Closing the System" on page 43.
11
Reconnect the system to the electrical outlet, and turn on the system.
book.book Page 94 Monday, June 5, 2006 1:51 PM