Filter
Top Products
56 Installing System Components
Figure 3-8. Installing Drive Shoulder Screws
*Screws are supplied along with the drives ordered from Dell.
8
Gently slide the drive into the bay until it clicks into place.
9
Attach the SAS cable (tape drive) or SATA power cable (optical drive) to
the drive. Ensure that cables are secured in their respective clips.
10
Attach the SATA data cable (optical drive).
11
Check all cable connections and fold cables out of the way to allow for
airflow between the fan and cooling vents.
12
Replace the front bezel. See "Installing the Front Bezel" on page 48.
13
Close the system. See "Closing the System" on page 46.
1 shoulder screws (3)*
1