Filter
Top Products
Installing System Components 93
Figure 3-26. Removing and Installing the Control Panel Assembly
Installing the Control Panel Assembly
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
Connect the control panel cable to the control panel board.
2
Align the slot in the control panel board with the standoff on the chassis
and secure it with the screw. See Figure 3-26.
3
Secure the link bracket lock by replacing the screw. See Figure 3-26.
4
Secure the control panel cable through the clips beneath the optional tape
or optical drive and on the side of the power supply unit.
1 mounting screw 2 control-panel board
3 control-panel cable 4 standoff
1
2
3
4