Dell UCSA-901 Computer Hardware User Manual


 
A message is displayed advising you to import the foreign configuration before you discard the
preserved cache to avoid losing data belonging to the foreign configuration. Confirm whether you
want to continue. The Manage Preserved Cache screen displays the affected virtual disks.
4. You can choose to discard the cache on the Manage Preserved Cache screen. If you press Cancel,
the process is cancelled and the Preserved Cache Retained dialog box is displayed.
If you choose to discard the cache, you are prompted to confirm your choice. If you choose to retain
the cache, a message is displayed to notify you that you cannot perform certain operations while the
cache exists. Click OK to continue.
Managing dedicated hot spares
A dedicated hot spare automatically replaces a failed physical disk only in the selected disk group which
the hot spare is part of.
A dedicated hot spare is used before a global hot spare is used. You can create dedicated hot spares or
delete them on the VD Mgmt screen.
Perform the following steps to create or delete dedicated hot spares:
1. On the VD Mgmt screen, select Disk Group # and press <F2>.
The available menu options are displayed.
2. Select Manage Ded. HS and press <Enter>.
A screen displays a list of the current dedicated hot spares with an X beside them and the physical
disks that are available to create dedicated hot spares.
NOTE: The utility allows only disks of the same disk technology and of equal or greater size to
be selected as dedicated hot spare.
3. Use the following instructions to create or delete a dedicated hot spare:
Creating a dedicated hot spare
1. Press the down-arrow key to highlight an available physical disk.
2. Press the spacebar to select the disk.
3. Repeat step 1 to step 2 for each dedicated hot spare that you want to create.
NOTE: An X is displayed beside the selected physical disk(s).
Deleting a dedicated hot spare
1. Use the down-arrow key to highlight a current hot spare.
2. Press the spacebar to de-select the disk.
3. Repeat step 1 and step 2 for each dedicated hot spare that you want to delete.
4. Press <Enter> to confirm the changes.
The VD Mgmt screen displays the updated list of hot spares.
NOTE: If a global hot spare or dedicated hot spare is removed, reinserted and imported, it
regains its status as a hot spare. A dedicated hot spare becomes a global hot spare when the
disk group it was assigned to protect is no longer present during import.
Deleting virtual disks
NOTE: You cannot delete a virtual disk during an initialization.
NOTE: Warning messages appear stating the effect of deleting a virtual disk. Click OK twice to
complete the virtual disk deletion.
78