Filter
Top Products
Probable
Cause:
The message indicates that some configured disks were removed. If the disks were
not removed, they are no longer accessible. The SAS cables for your system might
be improperly connected.
Corrective
Action:
Check the cable connections and fix any issues. Restart the system. If there are no
cable problems, press any key or <C> to continue.
Previous configuration of disks removed error message
Error Message:
All of the disks from your previous configuration are gone. If
this is an unexpected message, then please power off your
system and check your cables to ensure all disks are present.
Press any key to continue, or press <C> to load the
configuration utility.
Probable
Cause:
The message indicates that some configured disks were removed. If the disks were
not removed, they are no longer accessible. The SAS cables for your system might
be improperly connected.
Corrective
Action:
Check the cable connections and fix any issues before restarting the system. If
there are no cable problems, press any key or <C> to continue.
Missing virtual disks error message
Error Message:
The following virtual disks are missing: (x). If you proceed
(or load the configuration utility), these virtual disks will
be removed from your configuration. If you wish to use them at
a later time, they will have to be imported. If you believe
these virtual disks should be present, please power off your
system and check your cables to ensure all disks are present.
Press any key to continue, or 'C' to load the configuration
utility.
Probable
Cause:
The message indicates that some configured disks were removed. If the disks were
not removed, they are no longer accessible. The SAS cables for your system might
be improperly connected.
Corrective
Action:
Check the cable connections and fix any issues. Restart the system. If there are no
cable problems, press any key or <C> to continue.
Dirty cache data error message
Error Message:
The following virtual disks are missing: (x). If you proceed
(or load the configuration utility), these virtual disks will
be removed from your configuration. If you wish to use them at
a later time, they will have to be imported. If you believe
these virtual disks should be present, please power off your
system and check your cables to ensure all disks are present.
Press any key to continue, or 'C' to load the configuration
utility. The cache contains dirty data, but some virtual disks
are missing or will go offline, so the cached data cannot be
written to disk. If this is an unexpected error, then please
99