Filter
Top Products
Memory Module(s) | 31
11
Memory Module(s)
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the Memory Module(s)
Prerequisites
1 Remove the stand cover. See "Removing the Stand Cover" on page 15.
2 Remove the stand. See "Removing the Stand" on page 17.
3 Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1 Remove the screw that secures the memory-module shield to the
system-board shield.
2 Slide the memory-module shield toward the top of the computer, and lift it off the
system-board shield.
1 system-board shield 2 screw
3 memory-module shield
2
3
1
book.book Page 31 Monday, October 8, 2012 4:27 PM