Filter
Top Products
Infrared (IR) Receiver | 79
25
Infrared (IR) Receiver
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the Infrared Receiver
Prerequisites
1 Remove the stand cover. See "Removing the Stand Cover" on page 15.
2 Remove the stand. See "Removing the Stand" on page 17.
3 Remove the back cover. See "Removing the Back Cover" on page 19.
4 Follow the instructions from step 1 to step 3 in "Removing the Optical Drive" on
page 25.
5 Follow the instructions from step 1 to step 2 in "Removing the Hard Drive" on
page 21.
6 Remove the converter board. See "Removing the Converter Board" on page 29.
7 Remove the fan. See "Removing the Fan" on page 55.
8 Remove the system-board shield. See "Removing the System-Board Shield" on
page 35.
9 Remove the system board. See "Removing the System Board" on page 69.
book.book Page 79 Monday, October 8, 2012 4:27 PM