Filter
Top Products
System-Board Shield | 35
12
System-Board Shield
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the System-Board Shield
Prerequisites
1 Remove the stand cover. See "Removing the Stand Cover" on page 15.
2 Remove the stand. See "Removing the Stand" on page 17.
3 Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1 Remove the screws that secure the system-board shield to the chassis.
2 Carefully lift the system-board shield and turn it over.
1 screws (5) 2 system-board shield
2
1
book.book Page 35 Monday, October 8, 2012 4:27 PM