Filter
Top Products
Display Panel | 77
Replacing the Display Panel
Procedure
1 Connect the display cable to the connector on the display panel and secure it with
the tape.
2 Align the screw holes on the display panel with the screw holes on the chassis.
3 Replace the screws that secure the display panel to the chassis.
4 Connect the converter-board cable to the connector on the display panel.
5 Align the screw holes on the chassis with the screw holes on the middle frame.
6 Replace the screws that secure the chassis to the middle frame.
7 Route all the cables through the routing guides on the chassis.
Postrequisites
1 Replace the system board. See "Replacing the System Board" on page 71.
2 Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
3 Replace the fan. See "Replacing the Fan" on page 56.
4 Replace the converter board. See "Replacing the Converter Board" on page 30.
5 Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on
page 23.
6 Follow the instructions from step 4 to step 6 in "Replacing the Optical Drive" on
page 26.
7 Replace the back cover. See "Replacing the Back Cover" on page 20.
8 Replace the stand. See "Replacing the Stand" on page 18.
9 Replace the stand cover. See "Replacing the Stand Cover" on page 16.
10 Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 77 Monday, October 8, 2012 4:27 PM