Filter
Top Products
2-11
Cisco BBSM Hotspot 1.0 User Guide
78-15293-01
Chapter 2 Setting Up BBSM Hotspot
Running the Setup Wizard
–
After the question asking if you want to change your IP addresses, click No to ignore the
connectivity issues and continue with the setup. A warning message pops up to tell you that you
must resolve the IP address issue for BBSM Hotspot to work properly. (See Figure 2-9.) You
are then taken to the Enter Network Device Configuration Parameters window.
(See Figure 2-10.)
–
Click Cancel to stop the setup.
Figure 2-8 Test Failure Window
Figure 2-9 You Must Resolve This Issue Dialog Box
Step 11
Click Next. The Enter Network Device Configuration Parameters window appears. (See Figure 2-10.)